How to Fix A Bathroom Sink Stopper

How to Fix A Bathroom Sink Stopper

Worried about your clogged sink? In this guide, you will learn how to fix a bathroom sink stopper by yourself, without needing any expert help.

We understand that it can be frustrating if any problem arises in your daily use necessities, and you have to wait for a professional to come and fix the problem.

That's why we have brought the easiest and step-wise guide on how to fix a bathroom sink stopper all by yourself. You Can Also See The Top 10 Most Beautiful Women In The World

But make sure to buy the exact match of tools that may need replacement.

So, without any further ado, let's get into it.

What Tools to Gather Before Fixing a Bathroom Sink Stopper?

To prevent yourself from indulging in any problem in the middle of your working, gather the following tools before you start repairing a bathroom sink stopper.

• New sink stopper or drain stopper
• Plier
• Screwdriver
• New pivot rod (You will need it if your current one is damaged)
• New pivot ball

What Damages Your Sink Stopper?

There may be few reasons why your sink stopper isn't working.

Basically, the pivot rod is the main component which pushes the sink stopper up and down.

NOTE: If your stopper doesn't come out by hand, it means that it's fixed by the pivot rod, and you need to disassemble it from beneath the sink for further inspection and fixage.

Hence, the pivot rod itself or any part of its connection being damaged can inhibit the working of your stopper.

Here are some reasons why your sink stopper isn't working and needs to be fixed or replaced.

• Any part that goes from the pivot rod and attaches to the stopper might be broken or rusted. So it needs to be replaced.
• Your sink stopper might be broken, so the pivot rod is unable to lift the stopper down.
• Dirt, debris, hair or mineral deposits inside can inhibit your stopper from draining correctly.

How to Fix a Bathroom Sink Stopper?

Here is the stepwise method on how to fix a bathroom sink stopper.

Step 1: Loosen the Spring Clip and Clevis Strap

To take out your bathroom sink stopper. First, you have to remove the pivot rod.

Beneath your sink, there is a spring clip that holds the clevis strap to remain attached with the pivot rod. So, to remove the pivot rod first loosen the spring clip.

Step 2: Unscrew Pivot Rod

Secondly, loosen the pivot rod nuts by screwdrivers or pliers, and free your pivot rod from the sink's connection. Also, remove the clevis strap and spring clip.

Loosen the gasket by twisting it and you will find a white ball on the pivot rod.

(The gasket holds the pivot rod and takes the connection upward towards your sink)

NOTE: The ball acts as a seal to prevent water from spreading away from the sink drainage system.

Step 3: Replace or Clean Pivot Rod

If your pivot rod is rusty or broken, replace it with a new one. If not, clean the rod before fixing it back.

Step 4: Unscrew Sink Stopper

Unscrew the sink stopper from the top of the sink.

Step 5: Replace Stopper if Needed

Clean or replace the sink stopper as a whole, OR replace and clean the drain stopper which is attached beneath the main rod of your stopper.

NOTE: What needs to be replaced depends on the problem. So, you can detect it by observing visually. And if there seems to be no issue in the tools, make sure to clean every part (including the stopper drainage) before you fix them back. Because clogging can also be one of the main causes of problems.

Step 6: Reattach Everything Back

Reattach all the tools as they were before.

Conclusion

So, that is how to fix a bathroom sink stopper. To summarize, there are mainly two reasons that become the cause of fixing the stopper.

• Clogging because of entrapped materials or dirty sink tools (stopper, pivot rod or drain stopper).
• Rusty or worn-out pivot rod, sink stopper or drain stopper.

Hence make sure to replace and clean the parts that need maintenance.